Bluetooth technology in Battery Energy Storage System

What’s Bluetooth technology in Battery Energy Storage System? This is the latest technology in Battery ESS which can monitor and control the Battery ESS. In today’s world, the control and monitoring of any product and gadget is done through mobile applications. The user can go to the App Store on Android and IOS and can download the application on his mobile phone and then start using it.

Benefits of Bluetooth and Wi=Fi Bluetooth in Battery Energy Storage Systems

The challenge for the BESS users is to see the status of the Battery Energy Storage System in case anything goes wrong and BESS is shut down. You are getting frustrated as the LEd or the LCD is giving some stupid message you can’t understand, and you have no choice but to call the electrician.

Digital Warranty ESS
OverLoad ESS App

It takes time, and you don’t know what to do. So we have come out with a real solution: open the Su-vastika ESS mobile application, which comes in normal ESS and Heavy Duty ESS and see the message, and it will guide you on what to do in what condition. There are alerts for Overload, and the message will tell you what to do. If the power outage happens, it will keep giving you a message of power failure with the audio alert so that you know that Power has failed.

Also, when the mains power is present, it will show you the voltage and frequency coming into your premises. In case of voltage fluctuations, you can see the real voltage dipping or High voltage coming at your place. Not only are these times when the main Power is coming but also the MCB of Bluetooth BESS goes off because the Load connected with the Battery Energy Storage System exceeds its limit. This isn’t very pleasant for the user as the user doesn’t understand the functioning of the Bluetooth BESS. But in Bluetooth mobile application, we clearly show the user that MCB is down, and please lift the MCB from the back.

Another important feature is battery percentage which can be seen by the user how much battery is being charged, which gives the fair idea that in case of power failure, how much is the backup left?

Another important feature is when the main fails, then the Load is shown on the mobile screen, which is how a user knows the wattage being used when the Power fails, and according to his requirement, he can increase or decrease the Load.

Mains Fail Pop-up

UPS MODE with an alert pop-up of Mains Fail

Another important setting in the Bluetooth UPS is choosing the Reserve mode to conserve the battery power and use it when required in an emergency.

Battery reserve is another big feature of the setting. We can set the reserve as battery reserve helps increase the battery life. The same feature allows the user, in case of an emergency, you can get extra backup when the ups are completely exhausted by changing the settings on the mobile app. This feature works like a reserve in a scooter or motorcycle. It stops the scooter when the petrol is very low, and the user changes the scooter’s settings to reserve mode and runs an extra mile. The same feature we have adapted in our Battery Energy Storage Systems.

There are different types of BESS, Inbuilt Battery Energy Storage Systems having built-in Lithium batteries, Heavy Duty BESS(1P-1P) and Heavy Duty BESS(3P-3P). All three mobile applications are different for different product ranges.

Another important feature is Overload at the time power fails. Then also you get the message about how much Overload is in terms of percentage. Say 110% load is running. Users can reduce the Load, and the BESS functions fine. But in case the user does not reduce the Load even after a few warnings, then the BESS will get into the switch-off mode, and still, the user does not have to go to Inverter or UPS to reset the front switch as we have given that switch also on the mobile application and user can reset from the front switch for the Heavy Duty BESS and small BESS it can be done through the mobile application itself.

Another important feature is the Load to be shut down by the user from the remote control through the mobile application, which looks like a Magic moment for the user in the case of small BESS and Heavy Duty BESS. We have not given this feature. We have given all the settings on the mobile application.

One can easily see on the mobile application and set the settings.

The most important feature of the mobile screen is the 50 and 60 Hz Frequency. In some countries, the voltage is 220Volt, but the frequency is 60Hz. So we have designed this product for 50 and 60 Hz automatic selection. This automatically detects the Input frequency and gives the same frequency when the Power fails. No other manufacturer has considered making a common product that can work in countries with 60 Hz, like Saudi Arabia.

We have the USB port at the back, which has been kept to check the parameters of the BESS and can be used to convert the normal BESS to Bluetooth and Wi-based BESS without making any changes.

This USB port will be used to check the parameters of BESS at any given time through the computer having our proprietary based software. The price of a Bluetooth Battery Energy Storage System is a little higher than that of a normal Battery Energy Storage System. The Bluetooth BESS has the option of a Convertor to install, so our price is lower than any Bluetooth BESS available on the market.

In future, if we need to update our BESS software, we can update the software through this USB port.

This USB port will also be used for checking the digital warranty also. The reseller can show the warranty to the user before installation of the product and can check the warranty at any given time through the laptop or Bluetooth converter.

All the settings of the BESS can also be done through this USB port only.

Leave a Reply

Your email address will not be published. Required fields are marked *